Why is my Check Engine Light on with codes for a rich fuel mixture?
Posted by Parts Depot on Nov 12th 2026
What the warning light and codes mean
If your Check Engine Light is on and a scan shows P0172, P026D, P2459, and/or P2A00, start with the plain-English meaning: the engine computer has spotted a fuel/air or emissions reading it does not expect. P0172 is usually described as “fuel trim system rich,” meaning the computer sees too much fuel for the air it calculates. P026D relates to fuel injection quantity too high. P2459 relates to particulate filter regeneration frequency, and P2A00 relates to heated oxygen sensor performance.
Those codes are clues, not a diagnosis. They do not prove the intake manifold is bad. For a 2022–2024 Cadillac Escalade or Escalade ESV with the LM2 or LZ0 engine, however, GM has a specific bulletin that says an intake manifold leak may cause this warning light and code set.
Why an intake manifold leak is one documented possibility
The intake manifold is the engine part that routes air into the cylinders. If it leaks, the engine can take in air or lose pressure in a way the computer did not account for. That can upset fuel/air calculations and emissions readings. Cadillac bulletin 22-NA-128 (NHTSA communication 11007118), dated August 2024, lists 2022–2024 Escalade models with LM2/LZ0 engines and states that the condition “may be caused by a leak at the intake manifold.” The bulletin is a service guide for technicians, not a recall. It does not mean every Escalade with these codes has a bad manifold, and it does not cover every model year or engine. Source note: Cadillac bulletin 22-NA-128 (NHTSA 11007118).
That difference matters when you are deciding whether to buy a part. A warning light alone is not proof. A code alone is not proof. The bulletin points to a leak test first, and only says to replace the intake manifold if a leak is found in it.
What a shop should confirm before you spend money
Ask the shop to confirm three things. First, does your vehicle match the bulletin’s listed years, models, and engines? Second, are these exact codes current, or were they stored earlier? Third, did the shop actually perform the manufacturer’s leak test and find a leak at the intake manifold? The bulletin references its service information leak test and PIP5684 for finding the leak, so the technician should be able to explain what test was done and where the leak was found.
If the leak test does not confirm a manifold leak, do not buy a manifold just because the Check Engine Light is on. Ask the shop to diagnose the actual cause of the codes. Replacing a part that has not been shown to leak can cost money without fixing the warning light. In that situation, repair or further diagnosis may avoid replacement.
A replacement intake manifold is a reasonable next step when the shop has confirmed a leak in the intake manifold on a vehicle covered by the bulletin’s conditions. If the shop only says “it might be the manifold,” ask for the test result before ordering.
Questions to ask your mechanic
- Does my Escalade fall within bulletin 22-NA-128’s years and LM2/LZ0 engine listing?
- Are P0172, P026D, P2459, or P2A00 current codes, and are there other codes too?
- Did your leak test confirm a leak at the intake manifold itself?
- If no manifold leak was found, what is the next diagnostic step?
These questions keep the decision tied to the documented fault instead of a guess based on the warning light.
If diagnosis confirms the intake manifold leak and you need a matching part, send your vehicle details—year, model, engine—and the original part label if you have it through our Contact Us page so the team can help you request the right part.
Need the part covered in this guide?
Shop used OEM replacement parts from Parts Depot with free U.S. shipping, a 1-year replacement warranty, and help confirming fitment before you order.